<?xml version="1.0" encoding="utf-8" standalone="yes"?><rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:content="http://purl.org/rss/1.0/modules/content/"><channel><title>Troubleshooting on bromine1997</title><link>https://bromine1997.github.io/posts/troubleshooting/</link><description>Recent content in Troubleshooting on bromine1997</description><generator>Hugo</generator><language>ko-KR</language><lastBuildDate>Wed, 10 Jun 2026 23:00:00 +0900</lastBuildDate><atom:link href="https://bromine1997.github.io/posts/troubleshooting/index.xml" rel="self" type="application/rss+xml"/><item><title>AD5420 Daisy Chain 출력이 안 나온 이유 — 오실로스코프로 쓰레기값을 잡기까지</title><link>https://bromine1997.github.io/posts/troubleshooting/ad5420-daisy-chain-dummy-data/</link><pubDate>Wed, 10 Jun 2026 23:00:00 +0900</pubDate><guid>https://bromine1997.github.io/posts/troubleshooting/ad5420-daisy-chain-dummy-data/</guid><description>AD5420 두 개를 Daisy Chain으로 연결했는데 출력이 아예 안 나왔다. 오실로스코프로 MISO를 확인했더니 쓰레기값이 보였다. 데이터시트에는 이미 UNDEFINED라고 적혀 있었다.</description></item><item><title>만능기판 테스트 중 계속 발열이 생긴 이유</title><link>https://bromine1997.github.io/posts/troubleshooting/ad5420-exposed-pad-short/</link><pubDate>Wed, 10 Jun 2026 12:30:00 +0900</pubDate><guid>https://bromine1997.github.io/posts/troubleshooting/ad5420-exposed-pad-short/</guid><description>AD5420을 TSSOP 변환기판으로 만능기판에서 테스트하려다 전원 넣으면 발열이 심하게 생겼다. 원인은 배선이 아니라 칩 바닥 exposed pad였다.</description></item><item><title>GPIO 12에 외부 회로를 연결했더니 부팅이 안 됐다</title><link>https://bromine1997.github.io/posts/troubleshooting/esp32-gpio12-strapping-pin/</link><pubDate>Thu, 04 Jun 2026 20:52:00 +0900</pubDate><guid>https://bromine1997.github.io/posts/troubleshooting/esp32-gpio12-strapping-pin/</guid><description>ESP32 Feather V2에서 GPIO 12에 외부 회로를 연결했더니 부팅이 안 됐다. 원인은 코드나 회로 문제가 아니라 스트래핑 핀이었다.</description></item><item><title>SPI 파형이 왜곡됐던 이유 — Digital Isolator 주파수 제한</title><link>https://bromine1997.github.io/posts/troubleshooting/tinkerboard2s-spi-frequency-issue/</link><pubDate>Sat, 30 May 2026 20:41:00 +0900</pubDate><guid>https://bromine1997.github.io/posts/troubleshooting/tinkerboard2s-spi-frequency-issue/</guid><description>ASUS Tinker Board 2S에서 SPI 통신 파형이 왜곡되는 문제를 겪었다. 원인은 하드웨어가 아닌 Digital Isolator의 주파수 제한이었다.</description></item></channel></rss>